Sash Lock Door Handles
Sash locks on door handles are a great way to improve the security of your home without compromising on aesthetics. They can be used with mortice latches or sash lock and can be used in conjunction with a night latch to provide additional security for doors that are internal.
The handles consist of a lever/handle on the backplate. They are usually used with a three or five lever mortice lock. They can be combined with the tube latch.
Lever Lock Handles
There are many different types of lever door handles to match any home decor. Rustic lever locks are popular in both farmhouse-style and modern homes. Classic lever handles are round or spherical, and easy to grasp. They are affordable and simple and can be utilized with any type of decor. To create a chic appearance, choose a polished chrome or satin nickel handle. These finishes are easy to clean and are durable. Antique bronze and polished brass are also alternatives. A majority of levers have a unique design, like small amber worm eyes, or long-horned crystals. Some levers have pins, stars or any other design molded into the bottom.
To change the lever lock door handles, first ensure you have the right screwdriver or other tool to remove them. Depending on the model and design you may need to make use of an awl or nail to remove the lever handle. Some lever handles come with an oblique notch or hole at the base of the handle that can be used to pull them open.
Once you have the proper tool, follow the manufacturer's instructions to remove your existing handles. You'll need to verify the size of the spindle on your new lever handle. Doors that have been morticed (cut into the door) for latches that were previously used or locks, and need to be fitted to a specific spindle size. Most lever handle manufacturers employ the standard door handle spindle.
If you want to replace a sash lock door handle, you must remove the old handle and disconnect the tubular latch bolt from the strike plate that is on the door frame. The next step is to drill a hole in the door frame, then insert the latch bolt through and connect it to the strike plate within the door frame.
It is crucial to remember that when you install a new lever handle, all handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user shouldn't be required to hold their hands tightly or twist their wrists. To meet ADA compliance standards, the lever door handle should not be operated using only fingers and thumbs, or even the entire hand.
Sash Lock Handles
The main function of locks for sash is to seal the door by pulling the sashes moving tightly. This helps to keep the interior temperature of the house and stops drafts. They also work well for doors that don't require the security of the keyed locking system.
Sash locks are often referred to as mortice sashlocks and combine a dead bolt and latch into a case that is fitted into the material of a door. They are used in conjunction with doors with handles, and there are many different options available to match your home.
The lever handles for locking is operated by a lever that has a hole cut in the backplate below. This allows a key inserted into the mortice sash to turn it. It is typically used for doors that don't lock, such as dining rooms and living rooms, but can be paired with a tubular lock on a more secure internal door.
They are designed to hold sash together multiple times, and have a hook that fits in the keeper. These are available in different designs and styles that work with various window types like hinged or sliding casement windows. Some are made from cast aluminium while others are brass or wrought iron. These are available in different finishes to match the other elements of the door furniture like escutcheons, which protect the keyhole.
The 3 lever sash locks are only suitable for doors that are internal. They do not offer the security level required by insurance companies. They also have a lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.
A door sash lock with 5 levers is a much more secure option for exterior doors, as it offers greater levels of resistance to forced entry and is more difficult to bypass or pick. The locks are upgraded in design that has been tested and certified to meet the strictest building, disability, and fire regulations.
To replace the handle of a sash lock, remove the old fastener from both ends by taking off the screws. Make sure you have a screwdriver in your bag, and carefully separate the pieces to prevent damage. Mark the screw holes with pencil to ensure that you align the new fastener properly when you are ready to install it. Remove any dust or flickers of paint and then screw the new fastener in place. It is important to test the handle to make sure it functions properly and forms a an effective seal.
Tubular Latch Handles
The tubular latch is an internal latch which is operated by turning the handle. It is designed to close a door but it does not secure it like mortice locks. They are typically used for doors with internal doors, where locking is not necessary. They can be fitted either with lever handles or knobs.
There are many sizes of tubular latch available. They range from the cheapest to top-of-the-line architectural quality. The size you select will depend on the use of the door as well as whether you require a lock function. If you require an emergency release mechanism that can be triggered by thumbs an emergency, then a lockable latch is needed.
The selection of the correct latch is dependent on the backset measurement of your door. pvc sash windows is the distance between the edge of your door and the center of the hole that is used for the door handle knob or rose, and you should select a latch with the same backset measurement. This will ensure your handle/door knobs will operate the latch with ease.
If you are installing a lever or knob that has a spring or not spring, it's essential to choose a tubular latch that is heavy-duty. It should come with an elongated follower that is double-sprung. This will ensure a smooth latch operation and will prevent it from becoming slow or unresponsive after regular use.
After you have chosen the appropriate latch to meet your needs the next step is to install it to the door. First, make sure the latch is level with the top of the door frame/casing by measuring and marking the location of the latch plate then drilling holes for it. Utilizing a countersink drill bit can help create the correct recess for it to fit comfortably into.
Once the latch is installed, you can fix it into the door. Before installing your door handles or locks it is crucial to make sure that the latch is working properly. To do this simply open and close the door several times. If it's not working correctly, try lubricating the door using WD40. Then, try it again. If you are still experiencing issues, it could be necessary to contact an expert locksmith or installer.
Keyhole Handles
Keyhole handles work with a tubular lock installed in the door. This latch is used to open and shut the door. When the handle is pushed down, the handle is engaged with the latch, and pulling it up, it opens the door to open. These kinds of handles are typically employed on doors that are internal like living rooms and dining room doors but can also be fitted to front doors when paired with the nightlatch.
Door knobs are more contemporary handles that include an sprung lever/handle, a square or round fixing stem and a thumb-turn or escutcheon. They come in a wide variety of styles and finishes to fit different doors around the home. They are able to be used with Euro cylinders or multipoint locking systems to provide additional security. This is accomplished by locking the door at several points on the height of the door. Compatible door handles must be fitted with the proper lock center dimension to accommodate the barrel.
A keyhole escutcheon covers the existing keyhole in the door to hide it and give the handle a sleek appearance. They can be purchased as a pop-on or screw-on design, and in a variety designs to match your door handle. A recessed escutcheon, that is affixed to the edge of the door to conceal the keyhole and give it a modern look, is also utilized.
Most of the handles discussed above are designed to be used with either a mortice lock or sash lock mechanism, however some are compatible with Euro cylinder locks as well. These are used on uPVC doors and require door handles that have a Euro cylinder cutout and suitable screw holes within the backplate to accommodate the euro cylinder. These handles could also require a Euro-cylinder escutcheon, or a standard escutcheon according to the use.
It is important to understand the distinctions between a sash or mortice lock and a tubular lock, as well as the compatibility requirements for each. It is important to consider the door's thickness as well as the hinges for your door and frame reinforcements, the dimensions of the backplate for the handle, the lock's central dimensions and the screw centers on the cylinder.